# gym80

Germany · Strength

gym80 is made in Gelsenkirchen, Germany, since 1980. The machines are selectorized and plate-loaded strength, built heavy and common in European clubs.

Guide rods, cables and pins are the service parts. The frame rarely is. Record the model so a cable order is for this machine, not for ‘the gym80’.

## Parts that come back

- **Cable.** Write which run you replaced, and whether the rest of the cable stayed. A visible fray is not the whole cable.
- **Guide rod.** Record if the rod was cleaned, dressed, or replaced. A stuck stack under load is not cured by telling a member to pull harder.
- **Selector pin.** A bent or missing pin takes the machine out of service. Write the pin, not only ‘the stack feels wrong’.
- **Bushing.** Play in a pivot is a bushing or a bearing until you look. Write which pivot, and what you fitted.
- **Upholstery.** Photograph the pad and name the machine. Recovering ‘the blue one’ is how the wrong bench is sent out.

---

Source: https://gymmaintain.com/brands/gym80
Language: en