Hooldus
Selectorized machines: the pin, the guide rods, and the stack
15. nov 2022 · 1 min lugemist
If the pin does not go through the plate, the machine is not ‘a bit stiff’. It is not selecting the weight the user thinks.
The selector pin is the safety device. It must pass through the chosen plate and hold. A bent pin, a missing magnet, or a plate that will not align takes the machine out of service.
Guide rods that are dry may squeak. Guide rods that are damaged will stick under load. Do not tell a member to “pull harder”. Sticking under load is how a stack drops late.
Shrouds
Shrouds hide the interesting faults and also hide debris. When you open one, look for broken belt or cable strands, a rubbing path, and weight plates that are cracked. A cracked plate is out of service.
Write which side you opened. “Checked the stack” does not tell the next person whether they are repeating you.
Increment weights that can be added on a horn need the same attention as the main stack. A loose add-on is a small plate with a large consequence.
Loe edasi
Rain and mud arrive on the first machines
The bikes and treadmills nearest the door take the water. Their faults are often the entrance, not the brand.
After a move, assume something loosened
Feet, shrouds, console leads, and anchors shift in a move. Check them the same day, on the same asset.
Belt dust is a maintenance clue
Black dust under a treadmill is not only dirt. It is the belt or the deck telling you they are wearing.