Konserwacja
A dead console is not always a dead machine
30 sty 2023 · 1 min czytania
Decide, per machine, whether the screen is the product or only a display. Write that limit on the status.
Some machines cannot be used without the console because resistance, incline, or safety stops live there. Others are mechanical and the screen is a scoreboard. The fault should say which.
If the machine is safe and usable without the display, you may leave it active and record the limit: “console dark, resistance manual”. If the stop or the resistance depends on the console, take it out of service. Do not make the member discover the difference.
Error codes
Write the code down. A photo of the code is better than a paraphrase. “It said something about E3” cannot be looked up. Resetting without recording the code throws away the only clue.
Power supply faults often show up as a console fault. Note whether other machines on the same circuit blinked. That keeps you from replacing three consoles because a socket is loose.
A console that reboots only when the room is hot belongs in the zone note as well as on the asset.
Czytaj dalej
Rain and mud arrive on the first machines
The bikes and treadmills nearest the door take the water. Their faults are often the entrance, not the brand.
After a move, assume something loosened
Feet, shrouds, console leads, and anchors shift in a move. Check them the same day, on the same asset.
Belt dust is a maintenance clue
Black dust under a treadmill is not only dirt. It is the belt or the deck telling you they are wearing.